i-WELD GTAW 200P AC/DC
Features
1. Welder Friendly controls
2. Generator Friendly (Low KVA Requirement)
3. High Frequency (H.F) Start/ Lift Start/ MMA Selector Switch for mode selection
4. H.F Auto Cut Off for protection against accidental triggering
5. MCB for fault protection & fuse for control circuit protection
6. Gas pre/post flow time adjustment (for gas purging and cooling)
7. Ease of maintenance
8. Digital Display for easy setting of the current
9. 2S/4S/ Fast Track Selector Switch for Trigger Hold and Quick Tacking
10. Current limit, Under Voltage and Overload Protection
11. Current Up/ Down Slope adjustment (for soft start and crater filling)
12. Tungsten tip saving circuit (in LIFT mode, when the tungsten is shorted to work, only 10A current flows)
Description
Applications
1. Tool / Die repair
2. Vassel / Tank / Boiler Fabrication
3. Train
4. Maintenance
5. Fabrication
Specifications (AC/DC TIG)
Model: GTAW 200P AC/DC
| Parameters | |
| Power Voltage (V) | : Single Phase AC240V+15% |
| Frequency (Hz) | : 50/60 |
| Rated Input Current (A) | : TIG: 32.5 |
| : MMA: 43.5 | |
| Output current (A) | : 10 – 200 |
| No Load Voltage (V) | : 44 |
| Rated Output Voltage (A) | : TIG: 18 |
| : MMA: 28 | |
| AC duty cycle (%) | : 20-80 |
| Pulse duty cycle (%) | : 10-90 |
| Post-flow time (S) | : 0-10 |
| Pulse frequency (Hz) | : 0.5-5.0 |
| Basic Value current (A) | : 5-200 |
| Arc initiation current (A) | : 5-200 |
| Attenuation time (S) | : 0-15 |
| Frequency (%) | : 80 |
| Duty cycle (%) @ 40°c | : 60 |
| Power factor | : 0.73 |
| Protection grade | : IP21 |
| Weight (kg) | : 20 |
| Dimensions (mm) | : 498x328x302 |
Additional information
| Brand | |
|---|---|
| Model | |
| Colour | Yellow |
| Performance | Gas Tungsten Arc Welding |
Reviews
There are no reviews yet.